Ames SP1 Super Primer 1 Gallon Pure Acrylic Elastomeric Plastic Sealant for Professional Use

Ames® Super Primer is a plastic sealant, primer and adhesive all in one. It can be used on concrete, cinder block, brick, tile, EPDM rubber, stucco, wood, metal, and many hard-to stick surfaces. Leaves a clear and slightly tacky surface that substantially increases adhesion for Ames® coatings. Much more powerful than a

Ames® Super Primer is a plastic sealant, primer and adhesive all in one. It can be used on concrete, cinder block, brick, tile, EPDM rubber, stucco, wood, metal, and many hard-to stick surfaces. Leaves a clear and slightly tacky surface that substantially increases adhesion for Ames® coatings. Much more powerful than a water repellant, helps seal against water damage and seepage while penetrating deeply into the surface to strengthen and bind together the molecules of the surface it is applied to. It also helps prevent mildew and moss formation adds many years of life to surfaces that may be rotting or deteriorating. Stregthens concrete substantially when used as an add-in to cement mix.

• Size: 1 Gallon
• Unique, 100 % pure acrylic elastomeric plastic sealant
• Waterbase, nearly odorless
• Nonflammable, and VOC free
• Can be used on concrete, cinder block, brick, tile, epdm rubber, stucco, wood, metal, and many hard-to stick surfaces
• Also helps prevent mildew and moss formation adds many years of life to surfaces that may be rotting or deteriorating
• Stregthens concrete substantially when used as an add-in to cement mix
• Easy to use, environmentally friendly.

Super Primer is Used To Prime

• Porous above and below grade Concrete and Cinder Blocks
• Brick and Tile
• I.C.F. (Insulated Concrete Forms)
• Basement Walls and Floors
• Sidewalks and Driveways
• Patios and Pool Decks
• Stucco and Stucco-type Wall Materials
• EPDM Rubber Roofs
• Asphalt Roofs
• Wood, Metal and other Hard-to-Stick Surfaces*
• Helps stop Rusty Metal.

Do-It-Yourself In Two Easy Steps

Surface Preparation

• All surfaces should be dry, clean, and free of oil, grease, and loose or flaking material. Power wash until surfaces are clean and free from moss and loose materials. If concrete is decomposing, it may be necessary to fill or repair it with a compatible concrete mixture to obtain a firm surface suitable for Super Primer. One such repair product is Ames® Blue Max Trowel Grade. New concrete should be allowed to cure for at least 30 days prior to application of products. Cracks larger than 1/8” should be filled with a butyl caulk, and all seams should be taped. Use Ames® brand seam tapes: LST60, CST100, or PS250, PS450, or PS650.

Apply Super Primer

• Apply with a 3″- 4″ wide paint brush, a 3/8” low nap roller, or paint sprayer. Apply a thin coat and allow proper drying between coats. More than one coat is recommended; more coats equal longer life.

Estimated Coverage

• Standard product coverage on a smooth surface is 100 to 200 square feet per gallon per coat. Rough surfaces such as cinder block may require additional product and drying time.

Specifications

MFR: SP1 SKU: 11398870 UPC: 856955000707 Brand: Ames Research Length: 7 Width: 7 Height: 8