Dremel 144 High Speed Steel Cutter 5/16 Inch Diameter 1/8 Inch Shank for Detailed Work

Ideal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes. For use in soft metals, plastics and woods especially on curved surfaces. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics. 5/16" diameter High speed steel cutter 1/8" shank Use for shaping,

Ideal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes. For use in soft metals, plastics and woods especially on curved surfaces. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics.

• 5/16″ diameter
• High speed steel cutter
• 1/8″ shank
• Use for shaping, hollowing most soft metals, plastics & woods
• Do not run in excess of 35,000 RPM.

User Tips:

• For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit
• Secure objects to a stable surface while working
• Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure
• Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact)
• If chattering occurs, increase speed.

Specifications

MFR: 144 SKU: 10391320 UPC: 080596001445 Brand: Dremel Length: 1 Width: 2 Height: 4