Zircon 64003 Leak Alert Electronic Water Detector Sensor Alarm for Early Leak Detection

No home should be without a Zircon Leak Alert™ electronic water detector. Place it near sinks, water heaters, sump pumps, and washing machines and find out about leaks before they can cause major water damage. When the Leak Alert™ detector comes in contact with water, it sounds an 85 dB alarm.Loud alarm (85 dB) sounds

No home should be without a Zircon Leak Alert™ electronic water detector. Place it near sinks, water heaters, sump pumps, and washing machines and find out about leaks before they can cause major water damage. When the Leak Alert™ detector comes in contact with water, it sounds an 85 dB alarm.
Loud alarm (85 dB) sounds with direct water contact

• Floats and signals for up to 72 hours
• Fully automatic operation — no wiring required
• Low battery indicator for optimum safety and performance
• Detects water leaks around water heater, undersink or in sump pump areas.

Specifications:

• Dimensions: 1.4″ (H) x 2.4″ (W) x 4.3″ (L)
• Battery Type: 9-V alkaline (not included)
• Low Battery indicator: Unit will beep to indicate low battery
• Battery Life: 72 hours of continuous alarm, up to two years idle depending on use
• Sound Intensity: 85 dB at 10′ (3 m)
• Operating Temperature: 32 degree to 120 degree F (0 degree to 49 degree C)
• Storage Temperature: -20 degree to 150 degree F (-29 degree to 66 degree C)
• Humidity: 80% (non-condensing)
• Shock Resistance: Shock resistant from a 6′ (1.8 m) drop onto concrete
• Water Resistance: Splash and water resistant, not waterproof. Floats on surface if battery is installed correctly.

Prevent serious water damage in your home with the help of Leak Alert™ water detector. This self-contained battery-powered unit will sound a loud alarm the second it gets wet, alerting you to a potential water leak.
Place it anywhere the potential for flooding or leaking exists:

• Under sinks
• Near water heaters
• In basements
• Near dishwashers and refrigerators
• Under fish tanks
• Near plumbing and toilets

How does it work?

• The Leak Alert has two external metal strips with mild electrical current running through them. If both strips get wet, through a plumbing leak, flood, or surrounding moisture condensing on the surface, the electrical circuit will complete and the alarm will sound. These strips are placed close together and run to the bottom of the Leak Alert, so even the slightest bit of water will be enough to complete the circuit and warn you of the problem.
• Make sure the Leak Alert is placed on its back with the metal contacts touching the surface. You can test the unit by touching both strips with one finger, but be prepared for the loud alarm!

Specifications

MFR: 64003 SKU: 10731673 UPC: 042186850086 Brand: Zircon Length: 9 Width: 4 Height: 2